Makalu 67
The lightweight solution for competitive gamers that expect no less than uncompromised performance. Using PixArt’s PMW3370 sensor with up to 19000 DPI and a patented unique ribcage design weighing only 67g.
Makalu 67 FAQ
Where can I find the Quick Start Guide?
You can download it by clicking here.
How can I check if my firmware is up to date?
If Base Camp does not prompt you with an update the latest version is installed. In order to check the firmware version, navigate to the Settings tab of your mouse. The release notes can be found here.
How many buttons does Makalu 67 have?
Makalu 67 has a total of 5 buttons: Left and right mouse button, a clickable wheel, and buttons 4 and 5 on the left side.
What does the 67 in Makalu 67 mean?
The 67 in Makalu 67’s name represents its weight in grams.
Does Makalu 67’s mouse wheel scroll horizontally?
No, it supports only vertical scrolling.
What kind of switches does Makalu 67 use?
Makalu 67 is built with Omron 50M switches.
What are the dimensions of Makalu 67?
Makalu 67 measures 127×70.2×42.2mm (LxWxH)
What are best practices to clean Makalu 67?
Compressed air does wonders! While Makalu 67 has a water-repellent coating on its PCB, it’s still a good idea to discharge air for a second or two before going to work on your mouse in order to get possible moisture out of the hose. We also recommend rubbing alcohol wipes for surface cleaning.
How can I replace Makalu 67’s feet?
It’s easier than you might think! Use a hair dryer on a low setting to warm up the installed feet, causing the adhesive to loosen up. Then pry the feet off with a plastic spudger or similar. Clean the remaining adhesive with an alcoholic solution such as isopropyl (“rubbing alcohol”). Once dried, Makalu 67 is ready for new feet!
How can I open Makalu 67?
Simply use the instructions listed above under how to replace the feet in order to remove them and unscrew the screws under either feet. There are four screws in total
Can I remap Makalu 67’s buttons?
Absolutely, using Base Camp you can remap your buttons with ease, click here for more details.
Is there a software to manage Makalu 67?
Of course! Makalu 67 is supported by our Base Camp™ software.
Does my Makalu 67 support Razer Chroma™ RGB?
It does! First head over to the Base Camp™ settings page and enable Razer Chroma™ RGB Sync. Once done, please make sure your install of Razer Synapse 3 is up to date, head to its module section, then download and activate the Chroma connect module and select “Devices” to enable the sync.
How can I use Razer Synapse to control my Makalu 67's lighting?
First head over to the Base Camp™ settings page and enable Razer Chroma™ RGB Sync. Once done, please make sure your install of Razer Synapse 3 is up to date, head to its module section, then download and activate the Chroma connect module and select “Devices” to enable the sync.
Does Razer Razer Chroma Connect RGB sync in Base Camp support individual LED RGB illumination?
No, Razer Chroma Connect RGB sync doesn’t support this feature. This is however possible via Base Camp.